FLSUN QQ-S 90% Pre-assembled Delta 3d Printer Printing Size Φ255X360mm Lattice glass platform Auto Leveling Touch Screen
About this deal
I have found this from the flsun qqs facebook group that someone made, uploaded it to the SD, started duetwifi 192.
It can also be helpful to increase the stability of the printer somewhat, since the problems are probably caused more by vibrations than by a lack of material flow.
As for tools, everything necessary and more is included, and Flsun is also generous with other spare parts. Here is a small slideshow of the prints I was able to make, with a layer height of 0,20mm, and filaments from Sunlu (blue), Eryone (white), and Hiprecy (black).
With a maximum temperature of 270° C, QQ-S PRO can handle most common printing filaments, such as ABS PLA, PVA and wood. Even though the 3D printer detects short circuits and missing thermistors, it does not shut down when there is no temperature change despite heating up.It is obvious that the printer, due to its design, is quite high at 101cm including the filament spool, but with a triangular base of 46cm edge length it occupies not much space on your workbench. With its sold all metal construction, this printer gives you the stability required for high-quality prints, along with precision due to its physical dimensions. With a maximum temperature of 270 °C, the QQ-S PRO is set to handle all common print filaments such as ABS PLA, PVA, and wood.
In addition, my daily breakfast is Notebookcheck's long list of new content, which I comb through to select the most interesting topics for translation from English to French, Italian, Spanish, Portuguese, and Dutch. The stepper motor drivers are plugged into sockets and can therefore be quickly replaced if necessary - that's how I like it! he also said that it will not come with any accessories if somebody know what were the accessories out of the box and if they are needed.The belt tension can be conveniently adjusted on the pulleys at the top of the frame using knurled nuts. Workhorse: no print failed, and any messier prints were because we should have better optimized the support settings. I enjoy building all sorts of gadgets with Arduino and 3D printers, and I still like to put electronic devices through their paces. It was not very well known in Europe until now, but it is gradually starting to make a name for itself thanks to its Delta type 3D printers, which it has made its speciality!
There are no big surprises here in terms of hardware; the limit switches, hotend and extruder are standard parts, as they are also used in many other printers. The print bed heating reaches the maximum temperature of 110°C specified by the manufacturer after 10 minutes, whereby the ambient temperature at the time of the measurement was 16°C.Due to the lack of thermal insulation of the heating block, some heat is lost, since the air from the coldend's fan can only escape downwards. We tested this by plugging a thermistor into the corresponding port on the mainboard instead of the original one and then starting a print. Providing a strong adhesion during the print and to be easily taken off, once the print is completed and the bed is cooled.