Posted 20 hours ago

G Thread (Metric BSPP) Female to NPT Thread Male Pipe Fitting Adapter - Lead-Free (Two 3/4 inch)

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

British Standard Pipe ( BSP) is a set of technical standards for screw threads that has been adopted internationally for interconnecting and sealing pipes and fittings by mating an external ( male) thread with an internal (female) thread. Other options = Units with special voltages and/or 60 Hz possible, Higher operating pressures and greater volume flows on request, Water cooled condensers available (larger models only).

Not knowing the exact application and set-up it is almost impossible for us to diagnose the issue from a distance. To avoid damaging the pressure gauge’s threads, regardless of the connection type, use the right wrench and use it only on the flat area of the socket. If accuracy is critical, base your final decisions on the data provided in the root document: ISO 228; which is a copyrighted document.If you have a gauge with a metric G1/2B thread and your port is NPT or vice versa, try to find an adaptor. There are mainly two ways of identifying a british standard pipe parallel (BSP-P) thread, either with the thread size suffixed by “BSP-P” or prefixed with “G”. Pressure connections which include the suffix EN 837 or DIN 16288 are sealed on the end of the thread with a small diameter O ring which is placed around the post protruding from the end of the thread. The compression adaptor connector is made of stainless steel, anti-corrosion, good workmanship, no burrs, clear and uniform threads, non-toxic and tasteless, and can be used in domestic water pipes with confidence.

For complete details of the different sizes for this type of process connection, view this National Pipe Thread page. Prefixing with G, is equivalent to adding BSP after the pipe size, although BSPP is more strictly correct to define the parallel version. Taper threads, British Standard Pipe Taper thread ( BSPT), whose diameter increases or decreases along the length of the thread; denoted by the letter R.S. and Canada also use parallel threads like the NPSM (National Pipe Straight Mechanical) connector. If everything is piped and connected correctly and provided that the right pressure range was selected you should see a reading on the pressure gauge. Also, for the G1/2B connection, you need a gasket because the thread bottoms out and that’s where you need to create a seal. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

This is the source of the confusion, as people incorrectly think the size refers to the outside diameter of the male thread.You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. As sealing of the connection takes place on the washer and not on the thread itself, no sealing compound or PTFE tape is required. DIN3852-E type pressure fittings include a channelled profile in the sealing face for accepting an elastomer seal. The main benefit of this connection type is it’s convenience at being integral to the process connector eliminating the need for additional components or alignment of the seal. It is a type of tapered thread process connection, normally written as 1/4inch – 18 NPT male, the 1/4 inch (0.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment